$340.00
RJX-26A marine firefighter boots. Steel toe cap, steel anti-impale midsole, flame retardant FV-1, and electrical insulation. Resistant to oil, acid, alkali, corrosion, puncture, cutting, thermal radiation, water, and slipping. Black with yellow lines. Euro 45 / UK 10.5 / US 11.5. Available ex-stock.
Our SOLAS-compliant marine firefighter boots are designed to protect the feet of fire fighters in fire fighting, emergency and disaster rescue, traffic accident, and vehicle extraction rescue situations.
Black with yellow lines. Multi-layer construction throughout.
✓ Oil resistant
✓ Acid and alkali resistant
✓ Corrosion resistant
✓ Puncture resistant — steel anti-impale midsole
✓ Cutting resistant
✓ Thermal radiation penetration resistant
✓ Water resistant
✓ Slip resistant — anti-slip outer sole with raised stripes
✓ Electrical insulation
✓ Anti-smash steel toe cap
✓ Heat insulation
✓ Flame retardant — FV-1
The boot is constructed in two main parts: the shoe and boot upper. Multi-layer construction throughout the whole body.
| Specification | Upper Surface | Outer Bottom |
| Breaking Strength | ≥14.7MPa | ≥10.78MPa |
| Elongation at break | ≥480% | ≥380% |
| Permanent deformation at break | ≤40% | / |
| Abrasion Loss | / | ≤0.8 |
| Strength | 55–65° | 55–70° |
| Brittleness Temperature | ≤-40°C | ≤-40°C |
| Air Aging | 100°C × 24H | 100°C × 24H |
| Breaking Strength Decreased | ≤35% | ≤35% |
| Flame Retardant Property | FV-1 | FV-1 |
| Adhesion Strength of surface & fabric | 0.78N/mm | / |
| Thickness of vamp | >1.5mm | / |
◆ Colour: Black with yellow lines
◆ Size: Euro 45 / UK 10.5 / US 11.5
These boots provide limited protection against corrosive liquids, gases, military toxic agents, and direct electrical contact. They are not chemical protective boots and are not suitable as a substitute for specialist chemical or electrical protective footwear.
+64 9 275 4680 | mark@liferaftssouthpacific.co.nz